Added Canon Log 3 to Canon Log settings, a log gamma curve that possesses largely the same characteristics with Canon Log 1 but with a wider dynamic range. It is also found in our professional line of cameras, the Cinema EOS Series, allowing easier post-production camera matching work between the EOS R5 with Cinema EOS cameras.
Added Low Bitrate recording option, allowing users to shoot smaller file size footage with lower image details. This is very useful for longer recordings that do not require the best possible image quality or when storage space is a concern.
Added 120p Full HD video recording, allowing users to have the flexibility to select desired resolution for slow-motion content thus allowing more convenience during post-processing.
Electronic Full-time Manual Focus
LCD Backlight OFF option
FTP Transfer Status Display
Protect Image Transfer
Save/Load Settings on Card
Fixes a phenomenon, in rare cases where the camera does not function normally when using certain CFexpress cards.
Fixes a phenomenon, in rare cases where the camera does not function normally when the drive mode is set to “High-speed continuous shooting” to shoot still images continuously.
Já fiz nas duas, R5 e R6. Na R6, ainda bem que não cheguei a fazer com o 1.3.0, quando fui lá já tinham retirado e no dia seguinte saiu o 1.3.1…
A maioria dos updates são mais para video e algumas outras para a parte de fotografia…
Ontem, quando tirava algumas fotos com a R5, uma jpeg saiu totalmente deformada, e o interessante que o RAW não… Provavelmente defeito no card.
Valeu André Sena, obrigado por todas as informações que você tem postado!
Foi no SD card André, Lexar 128GB SD/XC II, V90 U3 2000X, 300MB/s.
Ate agora não tive nenhum problema com o CF…
Eu uso o SD para Jpeg’s e o CF para RAW…
Se acontecer outra vez sim, vou acionar a garantia… Esse SD é novo e só tirei 2700 fotos com ele…
Bem, acontece!!!
Nunca tive nenhum problema com a marca SanDisk…
Firmware Version 1.3.1 incorporates the following fixes and enhancements:
Adds [Canon Log 3] to [Canon Log settings]. You can select [Canon Log] or [Canon Log 3] from [Canon Log settings] in the Shooting tab of the menu.
Support for RAW movies shot with Canon Log3 and RAW (Light) will be available in Cinema RAW Development and in Digital Photo Professional version in a future update.
Digital Photo Professional will also support the processing of RAW movies shot in Canon Log3 settings and the application of Viewing LUT in a future update.
Adds [RAW (Light)] to the movie recording size and [IPB (Light)] to 8K/4K to enable lower bit rate shooting. These settings can also be selected when RAW+MP4 is set.
Adds a high frame rate of 119.9 fps/100.0 fps to the Full HD movie recording size.
Adds [Electronic full-time MF] to the AF tab of the menu. When a lens is attached, manual focus adjustment is always possible with both One-shot AF and Servo AF.
Adds [6: Monitor Off] to [Shooting info. disp.: Screen info. settings] in the Shooting tab of the menu. This update makes it possible for the camera’s monitor to be turned off at all times during shooting.
The transfer time (estimated value) now displays on the camera monitor during FTP transfer.
Adds the ability, when transferring images via FTP, to select protected images that failed to be transferred and protected images that have not yet been transferred and transfer them all at once.
Adds [Save/load cam settings on card] to the Function settings tab of the menu.
This allows you to save the camera settings to a card, or load a saved file and restore the camera to the settings you saved to a card.
Fixes a phenomenon, in which, in rare instances, the camera does not function normally when using certain CFexpress cards.
Fixes a phenomenon, in which in rare instances, the camera cannot function normally when the drive mode is set to “High-speed continuous shooting” to shoot still images continuously.
Fixes a phenomenon in which the power may become suspended when the camera is powered via USB for an extended period of time.
Fixes a phenomenon, in which part of the settings screen is incorrectly displayed in Firmware Version 1.2.1.
Fixes a phenomenon, in which when shooting with Canon Log 3, if the [View Assist.] setting is set to [On], the image in the viewfinder and on the LCD screen is displayed brighter than it should be.
*Items 1 through 12 apply to Version 1.3.0, whereas Item 13 applies to Version 1.3.1.
Segundo o Canon Rumors teremos um novo firmware p/ a R5 no dia 30 de junho.
Support for Both the COMPACT-SERVO 18-80mm and 70-200mm Lenses[i] – Compact production now fits in the palm of your hand! The popular ENG lenses can now be used (via an EOS R adapter) on the dynamic EOS R5 camera when both the camera and lens firmware have been updated.
This update adds external 8K ATOMOS Ninja V+ support via the HDMI port.
Firmware v1.4.0 also adds simultaneous movie recording to both memory card slots and the VPG 400 profile.
Firmware Version 1.4.0 incorporates the following fixes and enhancements:
Adds support for outputting 8K/30p/10-bit video signals for ProRes RAW recording to ATOMOS’s Ninja V+ recorder* via HDMI.
If you have any questions about ATOMOS products, please contact ATOMOS directly.
Please note that the recorder may become hot.
Adds support for movie recording when the camera is connected to the CN-E18-80mm T4.4 L IS KAS S or CN-E70-200mm T4.4 L IS KAS S EF cinema lenses.
Still photography shooting is possible however performance is not guaranteed.
Movie shooting in vertical position is possible however performance is not guaranteed.
External power supply is required for AF operation during servo zoom operation. When there is no external power supply, AF operation is activated only when the servo zoom is not in use.
Adds simultaneous movie recording capability on card 1 and card 2, however RAW movies and RAW(Light) movies cannot be recorded simultaneously on card 1 and card 2.
Adds support for the VPG 400 (Video Performance Guarantee Profile), a standard based on the CFexpress 2.0 specification.
Improves operation stability when using the RF 400mm f/2.8L IS USM and RF 600mm f/4L IS USM.
Fixes an issue in which, during HDMI connection, if the camera’s screen turns off, a zebra pattern is displayed via the HDMI output.
Fixes an issue in which sufficient image stabilization effects may not be attained immediately after the start of shooting.
Firmware Version 1.5.0 is for cameras with firmware up to Version 1.4.0. If the camera’s firmware is already Version 1.5.0, it is not necessary to update the firmware.
A versão de firmware 1.5.1 incorpora a seguinte correção.
Corrige um problema que ocorre em casos raros, onde a câmera pode ficar inoperante ao fotografar na configuração AF Servo quando aciona o botão .
*Informação
A Canon sempre aprecia o feedback do usuário sobre nossos produtos e serviços. Após o lançamento do Firmware Versão 1.5.0, estamos desenvolvendo uma atualização para otimizar ainda mais as operações do AF. Planejamos publicar detalhes do novo firmware no final de março e faremos um anúncio no nosso site.
A versão de firmware 1.5.1 é para câmeras com firmware até a versão 1.5.0. Se o firmware da câmera já estiver na versão 1.5.1, não é necessário atualizar o firmware.
Agora que eu atualizei o FW da R5 reparei esse detalhe na descrição da v 1.5.1
*Informação
A Canon sempre aprecia o feedback do usuário sobre nossos produtos e serviços. Após o lançamento do Firmware Versão 1.5.0, estamos desenvolvendo uma atualização para otimizar ainda mais as operações do AF. Planejamos publicar detalhes do novo firmware no final de março e faremos um anúncio no nosso site.
Mesma nota no FW 1.5.1 da R6.
Final de março teremos novidades na R5/R6. :snack:
Atualizei minha R5 para o FW 1.5.2. Atualização procedeu sem nenhum problema.
Segundo alguns relatos pela internet a deteção e rastreio de olhos (pessoas) melhorou. Também vi alguns relatos que também houve melhora com relação a deteção de olhos p/ animais.
Durante a semana vou testar para ver se a melhoria de desempenho é perceptível para o meu uso.