Fujifilm GFX100S: atualização de firmware

Fujifilm GFX100S: atualização de firmware


firmware v1.10

30/06/2021

Addition of White Balance and ISO metadata to RAW footage

Added White Balance / ISO metadata to RAW footage, output to Atomos Ninja V HDR Monitor Recorder via HDMI. The footage is recorded as Apple ProRes RAW files and White Balance / ISO can be adjusted in Final Cut Pro.
Improvement of Custom mode function

Changes to the functioning of custom modes have altered how custom settings banks are created and edited using IMAGE QUALITY SETTING >DIT/SAVE CUSTOM SETTING and MOVIE SETTING > EDIT/SAVE CUSTOM SETTING in the shooting menu. You can register/edit after selecting the custom number from C1 Through C6.
The phenomenon is fixed that an image cannot be played back with a specified file name created by the EDIT FILE NAME function.

Fix of minor bugs.

Download do FW e do guia com os novos recursos:


Firmware 1.20
07/10/2021

The firmware update Ver.1.20 from Ver.1.10 incorporates the following issues:

Regarding the details, download the “GFX100S New Features Guide[Ver.1.20]” from our website.

  1. GFX100S will be able to output the RAW video data to Blackmagic Design’s Video Assist 7” 12G HDR and Video Assist 5” 12G HDR as “Blackmagic RAW” through HDMI up to 4K/29.97P 12bit (see Note-2 below)

•New firmware with this feature is supposed to be released by Blackmagic Design.
•RAW video data gives maximum flexibility for exposure adjustment and color grading in post-production for professional videographers.
Besides, simultaneous output of RAW with Film Simulation / F-Log / Hybrid Log Gamma (HLG) to SD card in the camera is also available.
  Note-1:GFX100/100S records “Blackmagic RAW” only with Blackmagic Design’s Video Assist 7”12G HDR and Video Assist 5” 12G HDR (as of Oct. 7, 2021).
  Note-2:This video RAW data is compatible with 4K (3840×2160) 29.97P/25P/24P/23.98P(Not compatible with FHD).

  1. The electronic level display will work in wider range of the tilt angle, so that you can use the electronic level on the LCD even if you tilt the camera more than that with the current firmware.

  2. Minor bugs have been fixed.


Firmware 1.30
16/02/2022

Change in the number of frames that can be stored in a single folder
・The maximum number of frames that can be stored in a single folder will be changed from 9,999 to 999 with Ver.1.30 or later.
If you are using a macOS computer to process recorded files in the SDXC memory card, make sure to follow the procedure below before upgrading the firmware.
Follow the instructions in “II-2. If using an SDXC memory card with existing files or one that has not been recently formatted:” in the article titled “Important notice for consumers processing FUJIFILM digital camera files using macOS” that was published on Feb. 2 in this web site and then format the SDXC memory card before using it.


Firmware 1.31
30/03/2022

Revised specification from Ver.1.30 to Ver.1.31

The firmware bugs have been fixed, which caused a EVF display failure when the “FRAME RATE PRIORITY” was selected in the [BOOST] menu by operating through the following menu flow.

[POWER MANAGEMENT] ➔ [PERFORMANCE] ➔ [BOOST]


Firmware 1.32
29/06/2022

Revised specification from Ver.1.31 to Ver.1.32

The accuracy of AF function has been improved at manual focus mode using “One-Push AF”.